Roost PRO- Gen 2- 10P- GT HEX **BACKORDER**

$610.00

Fitment

GT HEX fits Gatortail GTR/XD/XD3 surface drives that use a 3/4” hex prop shaft; sized for a true factory fit. No adapter required.

Why PRO

You built you rig to hunt shallow, run hard, and keep moving when the bottom turns to sand, hard mud, and shell. The Roost PRO is for the guys who are tired of burning props and losing performance mid-season.

SR-Hardened to Rc 40 and built on the Roost Gen 2 platform, PRO is engineered for maximum service life in the harshest conditions-so you replace props even less often and spend more time hunting and fishing.

Up to 2x the service life vs regular Roost Gen 2 for high-hour and abusive conditions.

Key features

  • SR Hardening Process for maximum wear resistance

  • Stronger blades for extreme durability under heavy use

  • Pro-Pitch ultra-precise blade geometry for repeatable performance

  • Computer spin-balanced for smooth operation

  • True surface-piercing design for efficient thrust in aerated water

  • Designed in CAD for tightly controlled geometry

  • Limited Lifetime Warranty*

  • Made in the USA; patented

Specs

  • Measure diameter: 12.25”

  • Pitch: 10

  • Material: Stainless steel

10 pitch—ready out of the box

Now available in 10 pitch—no more sending props out to get pitched down. Order it, bolt it on, go hunt.

Performance you can feel

Unlike conventional mud props that need deep trim and constant digging to make thrust, the Roost PRO is designed to perform in aerated water and stay efficient as conditions change. That means:

  • strong hole shot

  • excellent load carrying

  • speed without “artificially governing” the engine

  • unmatched shallow water performance

  • confidence in skinny water with hard bottoms

The real value: cost per season

A cheaper prop isn’t cheaper if you’re replacing it all the time. The Roost PRO is built to be the prop you can run hard, season after season—especially if you’re the kind of hunter who puts serious hours on your rig. Up to 2x service life vs regular Roost Gen 2, for the lowest cost-per-hour mud prop you can buy.

Go where other can’t. Drive when others drag. Kill more ducks.

Roost Gen 2 vs Roost PRO

Roost Gen 2

  • Best value for most hunters and fishermen

  • 5x longer average service life vs conventional mud props

  • Excellent durability and performance

  • Ideal for mixed bottoms, vegetation, and normal seasonal use

  • Compare at $410 vs 5 conventional props at $299 = $1,495; you save $1,085

Roost PRO

  • Built for the harshest conditions, most abusive, and highest-hour users

  • Up to 2x longer service life vs regular Roost; up to 10x longer average life vs conventional mud props

  • Best for sand, shell, abrasive mud, heavy loads, and “run it hard” users

  • Compare at $610 vs 10 conventional props at $299 = 2,990; you save $2,380

Fitment

GT HEX fits Gatortail GTR/XD/XD3 surface drives that use a 3/4” hex prop shaft; sized for a true factory fit. No adapter required.

Why PRO

You built you rig to hunt shallow, run hard, and keep moving when the bottom turns to sand, hard mud, and shell. The Roost PRO is for the guys who are tired of burning props and losing performance mid-season.

SR-Hardened to Rc 40 and built on the Roost Gen 2 platform, PRO is engineered for maximum service life in the harshest conditions-so you replace props even less often and spend more time hunting and fishing.

Up to 2x the service life vs regular Roost Gen 2 for high-hour and abusive conditions.

Key features

  • SR Hardening Process for maximum wear resistance

  • Stronger blades for extreme durability under heavy use

  • Pro-Pitch ultra-precise blade geometry for repeatable performance

  • Computer spin-balanced for smooth operation

  • True surface-piercing design for efficient thrust in aerated water

  • Designed in CAD for tightly controlled geometry

  • Limited Lifetime Warranty*

  • Made in the USA; patented

Specs

  • Measure diameter: 12.25”

  • Pitch: 10

  • Material: Stainless steel

10 pitch—ready out of the box

Now available in 10 pitch—no more sending props out to get pitched down. Order it, bolt it on, go hunt.

Performance you can feel

Unlike conventional mud props that need deep trim and constant digging to make thrust, the Roost PRO is designed to perform in aerated water and stay efficient as conditions change. That means:

  • strong hole shot

  • excellent load carrying

  • speed without “artificially governing” the engine

  • unmatched shallow water performance

  • confidence in skinny water with hard bottoms

The real value: cost per season

A cheaper prop isn’t cheaper if you’re replacing it all the time. The Roost PRO is built to be the prop you can run hard, season after season—especially if you’re the kind of hunter who puts serious hours on your rig. Up to 2x service life vs regular Roost Gen 2, for the lowest cost-per-hour mud prop you can buy.

Go where other can’t. Drive when others drag. Kill more ducks.

Roost Gen 2 vs Roost PRO

Roost Gen 2

  • Best value for most hunters and fishermen

  • 5x longer average service life vs conventional mud props

  • Excellent durability and performance

  • Ideal for mixed bottoms, vegetation, and normal seasonal use

  • Compare at $410 vs 5 conventional props at $299 = $1,495; you save $1,085

Roost PRO

  • Built for the harshest conditions, most abusive, and highest-hour users

  • Up to 2x longer service life vs regular Roost; up to 10x longer average life vs conventional mud props

  • Best for sand, shell, abrasive mud, heavy loads, and “run it hard” users

  • Compare at $610 vs 10 conventional props at $299 = 2,990; you save $2,380

**Blemish** GT2.5 Throttle Lever- Gatortail XD/non-XD Compatible
$34.45 $44.45

Now available in 10 pitch. No more sending off props to get them pitched down.

Stop spending $1,000+ per year on hardened propellers. You asked for maximum propeller life…and we listened. The new Roost Pro is hardened to Rc 40 by our SR Hardening Process to give you unbeatable longevity in the harshest conditions. Stop spending $1,000+ per year on other hardened propellers that still wear out too fast. Buy one prop for half the cost: the Roost Pro. Built on the new Roost Gen 2, the Roost Pro 10 pitch features 50% stronger blades for the ultimate in durable reliability, giving you confidence on the water. Now featuring Pro-Pitch blades for more precise blade geometry. The patented Roost Pro Gen 2 high performance shallow water propeller still provides a unique combination of speed, hole-shot, load carrying capacity, and shallow water capability into a single package. After 3 more year of internal testing and customer feedback, we’ve made the Roost Pro even better. The Roost has now undergone over 10 years of development, refinement, and 650 hours of testing to make the ultimate shallow water prop. Unlike conventional mud propellers, the Roost Pro does NOT require mud or deep submersion in water to generate adequate thrust, but is up to the task when aggressive digging is required. Specifically designed to perform well in aerated water, the Roost Pro can start out and stay on plane without having to trim deep, which minimizes wear and tear on the propeller, seals, and bearings caused by continually running mud and sand. The Roost Pro’s high-efficiency design does NOT artificially govern the engine, giving the user increased speed with less horsepower. All this adds up to a propeller that works great anywhere, and excels in shallow water with hard-packed mud and sand bottoms. Go where others can’t, drive when others drag, and kill more ducks!!!