Roost- Gen 2- 10P- MB HEX

$410.00

Fitment

MB HEX fits Mud Buddy and Boss surface drives that use a 3/4” hex prop shaft; sized for a true factory fit.

Why Gen 2

You built your rig to hunt shallow, run hard, and keep moving when everyone else is stuck. The Roost Gen 2 is for the guys who are tired of burning props and losing performance mid-season.

Built on the Roost Gen 2 platform, this prop is engineered for long service life-so you replace props even less often and spend more time hunting and fishing.

Up to 5x the service life vs conventional mud props for more hours on a single prop.

Key features

  • Stronger blades for extreme durability under heavy use

  • Pro-Pitch ultra-precise blade geometry for repeatable performance

  • Computer spin-balanced for smooth operation

  • True surface-piercing design for efficient thrust in aerated water

  • Designed in CAD for tightly controlled geometry

  • 1 year warranty*

  • Made in the USA; patented

Specs

  • Measure diameter: 12.25”

  • Pitch: 10

  • Material: Stainless steel

10 pitch—ready out of the box

Now available in 10 pitch—no more sending props out to get pitched down. Order it, bolt it on, go hunt.

Performance you can feel

Unlike conventional mud props that need deep trim and constant digging to make thrust, the Roost Gen 2 is designed to perform in aerated water and stay efficient as conditions change. That means:

  • strong hole shot

  • excellent load carrying

  • speed without “artificially governing” the engine

  • unmatched shallow water performance

  • confidence in skinny water with hard bottoms

The real value: cost per season

A cheaper prop isn’t cheaper if you’re replacing it all the time. The Roost Gen 2 is built to be the prop you can run season after season. 5x longer service life vs conventional mud props, drastically cuts your operating cost-per-hour.

Go where other can’t. Drive when others drag. Kill more ducks.

Roost Gen 2 vs Roost PRO

Roost Gen 2

  • Extreme shallow water performance

  • Best value for most hunters and fishermen

  • 5x longer average service life vs conventional mud props

  • Excellent durability

  • Ideal for mixed bottoms, vegetation, and normal seasonal use

  • Compare at $410 vs 5 conventional props at $299 = $1,495; you save $1,085

Roost PRO

  • Extreme shallow water performance

  • Built for the harshest conditions, most abusive, and highest-hour users

  • Up to 2x longer service life vs regular Roost; 10x longer average life vs conventional mud props

  • Best for sand, shell, abrasive mud, heavy loads, and “run it hard” users

  • Compare at $659 vs 10 conventional props at $299 = 2,990; you save $2,331

Fitment

MB HEX fits Mud Buddy and Boss surface drives that use a 3/4” hex prop shaft; sized for a true factory fit.

Why Gen 2

You built your rig to hunt shallow, run hard, and keep moving when everyone else is stuck. The Roost Gen 2 is for the guys who are tired of burning props and losing performance mid-season.

Built on the Roost Gen 2 platform, this prop is engineered for long service life-so you replace props even less often and spend more time hunting and fishing.

Up to 5x the service life vs conventional mud props for more hours on a single prop.

Key features

  • Stronger blades for extreme durability under heavy use

  • Pro-Pitch ultra-precise blade geometry for repeatable performance

  • Computer spin-balanced for smooth operation

  • True surface-piercing design for efficient thrust in aerated water

  • Designed in CAD for tightly controlled geometry

  • 1 year warranty*

  • Made in the USA; patented

Specs

  • Measure diameter: 12.25”

  • Pitch: 10

  • Material: Stainless steel

10 pitch—ready out of the box

Now available in 10 pitch—no more sending props out to get pitched down. Order it, bolt it on, go hunt.

Performance you can feel

Unlike conventional mud props that need deep trim and constant digging to make thrust, the Roost Gen 2 is designed to perform in aerated water and stay efficient as conditions change. That means:

  • strong hole shot

  • excellent load carrying

  • speed without “artificially governing” the engine

  • unmatched shallow water performance

  • confidence in skinny water with hard bottoms

The real value: cost per season

A cheaper prop isn’t cheaper if you’re replacing it all the time. The Roost Gen 2 is built to be the prop you can run season after season. 5x longer service life vs conventional mud props, drastically cuts your operating cost-per-hour.

Go where other can’t. Drive when others drag. Kill more ducks.

Roost Gen 2 vs Roost PRO

Roost Gen 2

  • Extreme shallow water performance

  • Best value for most hunters and fishermen

  • 5x longer average service life vs conventional mud props

  • Excellent durability

  • Ideal for mixed bottoms, vegetation, and normal seasonal use

  • Compare at $410 vs 5 conventional props at $299 = $1,495; you save $1,085

Roost PRO

  • Extreme shallow water performance

  • Built for the harshest conditions, most abusive, and highest-hour users

  • Up to 2x longer service life vs regular Roost; 10x longer average life vs conventional mud props

  • Best for sand, shell, abrasive mud, heavy loads, and “run it hard” users

  • Compare at $659 vs 10 conventional props at $299 = 2,990; you save $2,331

RM2.5 Throttle Lever Assembly- UNIVERSAL FIT **Backorder**
RM2.5 Throttle Lever Assembly- UNIVERSAL FIT **Backorder**
$149.95
MB2.5 Throttle Lever- Mud Buddy/BPS Compatible
MB2.5 Throttle Lever- Mud Buddy/BPS Compatible
$42.98

Now available in 10 pitch. No more sending off props to get them pitched down.

Better than ever, the new Roost Gen 2 10P features 50% stronger blades for the ultimate in durable reliability, giving you confidence on the water. Now featuring Pro-Pitch blades for more precise blade geometry. The patented Roost Gen 2 high performance shallow water propeller still provides a unique combination of speed, hole-shot, load carrying capacity, and shallow water capability into a single package. After 3 more year of internal testing and customer feedback, we’ve made the Roost even better. The Roost has now undergone over 10 years of development, refinement, and 650 hours of testing to make the ultimate shallow water prop. Unlike conventional mud propellers, the Roost does NOT require mud or deep submersion in water to generate adequate thrust. Specifically designed to perform well in aerated water, the Roost can start out and stay on plane without having to trim deep, which minimizes wear and tear on the propeller, seals, and bearings caused by continually running mud and sand. The Roost’s high-efficiency design does NOT artificially govern the engine, giving the user increased speed with less horsepower. All this adds up to a propeller that works great anywhere, and excels in shallow water with hard-packed mud and sand bottoms. Go where others can’t, drive when others drag, and kill more ducks!!!